Categories:

All Clips and Fasteners
- Acura
- Audi
- Buick
- Cadillac
- Chevrolet
- Chrysler
- Dodge
- Ford
- GMC
- Honda
- Hummer
- Hyundai
- Jeep
- Kia
- Lincoln
- Mazda
- Nissan
- Oldsmobile
- Pontiac
- Saturn
- Subaru
- Toyota
- Volkswagon
Bulbs
- Buick
- Cadillac
- Chevrolet
- GMC
- Hummer
- Oldsmobile
- Pontiac
- Saturn
Bumper Hardware
- Fascia
- Fog Lamp Capsule
- Nuts
- Push Type
- Rivet
Center Console Lids
- Buick
- Cadillac
- Chevrolet
- GMC
- Oldsmobile
Door Fasteners
- Bushings
- Door Lock Rod Clips
- Door Panel
- Hinge Pins
- Nuts
- Trim Panel
- Window Guides
Filters
- Air Filters
- Cabin Filters
Gaskets and Seals
Grill Clips
Headlamp Clips
- Clips
- Retainers
Hinge Pin Kits
Hood Insulation
Interior
- Door Panels
- Instrument Panel
- Trim
Keys
- Buick
- Cadillac
- Chevrolet
- GMC
- Hummer
- Oldsmobile
- Pontiac
- Saturn
Molding Clips
- Body
- Bumper
- Decoration
- Door
- Fascia
- Fender
- Reveal
- Rocker Panel
- Roof Rail
- Tailgate
- Twist Lock
- Wheel Opening
- Window
Nuts
- Extruded Type 'U'
- Grommets
- Hex Head
- Lamps
- License Plate
- Miscellaneous
- Push-In
Original Equipment
Retainers
- Christmas Tree
- Push Type
- Quarter Panel
- Radiator Baffle and Shroud
- Radiator Grille
- Screw Type
Rivets
- Blind
- Closed End
- Dome Head
- Peel Type
- Pop
- Speciality
- Split Type
Screws
- Hex Head
- License Plate
- Phillips Head
- Slotted Head
- Square
- Square Truss
- Torx Truss
Search Fasteners by Specs:
- Bottom Head Size
  - 10mm x 24mm
  - 12.5mm x 23mm
  - 12mm x 16mm
  - 12mm x 20mm
  - 12mm x 20mm
  - 12mm x 24mm
  - 12mm x 32mm
  - 13/16" x 13/16"
  - 13/16" x 29/32"
  - 13mm
  - 14.5mm
  - 14mm
  - 14mm x 17mm
  - 14mm x 18mm
  - 14mm x 20mm
  - 14mm x 22.5mm
  - 14mm x 28mm
  - 15.5mm x 20mm
  - 15mm
  - 15mm x 15mm
  - 15mm x 20mm
  - 16mm
  - 16mm x 38mm
  - 17.5mm
  - 17mm
  - 18.5mm
  - 18mm
  - 18mm x 20mm
  - 19.3mm x 25.5mm
  - 19.5mm
  - 19.5mm
  - 19.5mm x 14mm
  - 19/32" x 1-1/32"
  - 19/32" x 1-1/32"
  - 19/32" x 25/32"
  - 19mm
  - 20mm
  - 20mm x 20mm
  - 22mm
  - 22mm x 22mm
  - 22mm x 40mm
  - 25mm x 37mm
  - 26mm
  - 5/8” x 13/16”
  - 5/8” x 25/32”
  - 7/8 x 1-9/16”
  - 8.7mm x 12mm
  - 9.5mm
  - 9/16" x 5/8"
  - 9/16"-11/16"
- Depth
  - 16mm
- Drive Type
  - T-20
- Fits in Hole Size
  - 1/2"
  - 1/4"
  - 1/4" Square Hole
  - 10.5mm
  - 10mm
  - 11mm
  - 12.5mm
  - 13/32"
  - 13mm x 9mm
  - 15mm
  - 16mm
  - 17mm
  - 17mm x 20mm
  - 25/64"
  - 3/16"
  - 3/8"
  - 5/16"
  - 5/8"
  - 5mm
  - 6.4mm
  - 6.5mm
  - 6.5mm x 12.5mm
  - 6mm
  - 6mm x 16mm
  - 7.5mm
  - 7/16"
  - 7mm
  - 7mm x 10mm
  - 8.5mm
  - 8mm
  - 8mm x 8mm
  - 9.5mm
  - 9mm
  - 9mm x 20mm
  - 9mm x 9mm
- Flange Diameter
  - 1"
  - 1/2"
  - 1/4"
  - 11.1mm
  - 11/16"
  - 11/32"
  - 13mm
  - 17mm
  - 18mm
  - 19mm x 30mm
  - 20mm
  - 24mm
  - 3/8"
  - 30mm
  - 4.95mm
  - 43/64"
  - 5/16" - 7/16"
  - 5/16”
  - 5/8"
  - 7/16”
  - 8mm
  - 9/32"
  - 9mm
- Grip Range
  - 3/64" - 23/64"
  - .060”-.138”
  - .110"-.189"
  - .65mm-2mm
  - 0.8mm - 4.8mm
  - 1.5mm - 3.5mm
  - 1.6mm - 3.18mm
  - 1/32" - 7/32"
  - 1/64" - 1/8"
  - 1/8" - 1/4"
  - 1/8" - 3/16"
  - 11/64” - 11/32”
  - 1mm – 7mm
  - 2.79mm - 4.8mm
  - 3.6mm – 9.5mm
  - 3/16 - 1/4"
  - 3/16" - 17/64"
  - 3/16"-3/8"
  - 3/64” – 9/32”
  - 3/64”-15/64”
  - 3mm - 6mm
  - 4mm - 7.9mm
  - 5/16" - 7/16"
  - 5/32” – 5/16”
  - 9/64” - 3/8”
- Head Diameter
  - 1"
  - 1-1/16” x 2-3/16”
  - 1-1/32"
  - 1-21/32"
  - 1-3/16"
  - 1-3/8"
  - 1/2" x 1-3/16"
  - 10mm
  - 11.5mm x 21mm
  - 11/16"
  - 11/16" x 1-5/16"
  - 11mm
  - 11mm x 11mm
  - 12mm
  - 12mm x 20mm
  - 13/64" x 7/8"
  - 13mm
  - 14mm
  - 15/32" x 15/32"
  - 15/32” x 1-5/16”
  - 15mm
  - 15mm x 18mm
  - 16mm
  - 16mm x 38mm
  - 17.5mm x 25mm
  - 17mm
  - 18mm
  - 18mm x 35mm
  - 19.5mm
  - 19/32"
  - 19mm
  - 20mm
  - 20mm x 30mm
  - 21.5mm
  - 21mm
  - 22.5mm
  - 22mm
  - 22mm x 46mm
  - 23/32"
  - 23mm
  - 24.5mm
  - 24mm
  - 25mm
  - 25mm x 30mm
  - 26mm
  - 27/32"
  - 27mm
  - 27mm x 30mm
  - 28mm
  - 3/4"
  - 3/4” x 1-3/16”
  - 3/8"
  - 30mm
  - 35mm
  - 5/8"
  - 5mm x 13mm
  - 5mm x 14mm
  - 5mm x 15mm
  - 6mm x 16mm
  - 7/16 x 25/32
  - 7/8"
  - 7mm
  - 8mm x 17mm
  - 8mm x 18mm
  - 9/16"
- Head Type
  - Hex Head
  - Torx Truss
  - Truss
- Height
  - 1-7/16”
  - 11/16"
  - 11mm
  - 14mm
  - 16.5mm
  - 16mm
  - 17mm
  - 18mm
  - 19/32"
  - 19mm
  - 22mm
  - 24mm
  - 27mm
  - 28mm
  - 29mm
  - 5/8"
  - 6mm
  - 7mm
  - 8mm
  - 9/16"
- Hex Head Size
  - 10mm
  - 13mm
  - 15mm
  - 7mm
- Hole to Edge
  - 10mm
  - 11 mm
  - 14.5mm
  - 15mm
  - 19mm
  - 3/4"
  - 3/8"
  - 8mm
  - 9.5mm
- Inside Diameter
  - 6.8mm
- Interior
  - Instrument Panel
  - Trim
- Length
  - 1"
  - 1-1/8"
  - 1-7/8"
  - 1-9/32"
  - 12mm
  - 13.5mm
  - 13.9mm
  - 14mm
  - 16.5mm
  - 16mm
  - 17.5mm
  - 18mm
  - 19.3mm
  - 2"
  - 20mm
  - 24.5mm
  - 28mm
  - 31mm
  - 35mm
  - 35mm
  - 4-1/8"
  - 4-9/16"
  - 43mm
  - 5-1/4"
  - 5-9/16"
- Mandrel Type
  - Aluminum
- Material
  - Aluminum
  - Black Finish
  - Brass
  - Dacromet
  - Metal
  - Nylon
    - Black
    - Blue
    - Gray
    - Green
    - Natural
    - Orange
    - Pink
    - Red
    - White
    - Yellow
  - Phosphate
  - Rubber
  - Stainless Steel
  - Steel
  - Zinc
- Middle Head Size
  - 15mm
  - 15mm x 21mm
  - 16.5mm
  - 16mm
  - 19mm
- Outer Diameter
  - 30mm
- Panel Range
  - 5/32"-13/32"
  - .025"-.150"
  - .098" - .350"
  - .098" - .350"
  - .115" - .400"
  - .40"-.230"
  - .5mm - 2.0mm
  - .65mm-3.8mm
  - 0 - 1.5mm
  - 0mm - 1mm
  - 0mm - 2mm
  - 1.0mm-6.0mm
  - 1/16" - 5/32"
  - 1/32" - 9/64"
  - 2.0mm - 4.5mm
  - 2.0mm-5.0mm
  - 3.0mm - 6.0mm
  - 3.30mm
  - 3mm - 11mm
  - 4.5mm - 7.0mm
  - 6.0mm - 9.0mm
  - 7.0mm - 10.0mm
  - 7.0mm - 9.5mm
- Rivet Diameter
  - 1/4"
  - 1/8"
  - 3/16"
  - 3/8"
  - 4.8mm
  - 4.95mm
  - 4mm
  - 5/32"
  - 6.3mm
- Rivet Length
  - 3/8"
- Screw Size
  - M10-1.5
  - M4.2
  - M4.2-1.41
  - M4.2-1.41
  - M4.2-1.41 x 25mm
  - M4.8
  - M5.5
  - M5.5 x 20mm
  - M6-1.0
  - M6.3
  - M7.7
  - No. 10
  - No. 12
  - No. 14
  - No. 6
  - No. 8
- Shoulder Diameter
  - 16.5mm
  - 17mm
- Shoulder Length
  - 1/4"
  - 1/8"
  - 13/16"
  - 3mm
  - 5/32"
  - 7mm
- Stem Diameter
  - 10.3mm
  - 10.5mm
  - 10.8mm
  - 10mm
  - 11.3mm
  - 11/32"
  - 11mm
  - 12mm
  - 13mm
  - 13mm
  - 14mm
  - 5.8mm
  - 5/16"
  - 5mm
  - 6.5mm
  - 6mm
  - 7.5mm
  - 7.8mm
  - 7/32"
  - 7mm
  - 7mm
  - 8.75mm
  - 8mm
  - 9.6mm x 9.6mm
  - 9.7mm
  - 9/32"
  - 9mm
  - 9mm x 9mm
- Stem Length
  - 1"
  - 1-1/16"
  - 1-1/32"
  - 1-1/4"
  - 1-1/8"
  - 1-3/64"
  - 1/2"
  - 10mm
  - 11/16"
  - 11mm
  - 12mm
  - 13/16"
  - 13mm
  - 13mm
  - 14mm
  - 15/16"
  - 15mm
  - 16mm
  - 17.5mm
  - 17mm
  - 18mm
  - 19.7mm
  - 19/32"
  - 2"
  - 20mm
  - 21/32”
  - 21mm
  - 22mm
  - 23mm
  - 24mm
  - 25.5mm
  - 25mm
  - 26mm
  - 27/32"
  - 29/32"
  - 3/4"
  - 32mm
  - 33mm
  - 34mm
  - 41/64"
  - 5/8"
  - 6mm
  - 7/16"
  - 7/16"
  - 7/8"
  - 7mm
  - 8.5mm
  - 8mm
  - 9/16"
  - 9/32"
  - 9mm
- Stud Size
  - 5mm
- Thread Size
  - M10-1.5mm x 30mm
  - M12-1.75
  - M5-.08
  - M5-1.81 x 16mm
  - M6-1.0 x 20mm
  - M6-1.00mm
  - M8-1.25
- Top Head Size
  - 11/16” x 1-1/2”
  - 1/2" x 9/16"
  - 10mm x 12mm
  - 10mm x 15mm
  - 11mm x 14mm
  - 11mm x 15.5mm
  - 11mm x 15mm
  - 12.5mm x 23mm
  - 12mm x 16mm
  - 12mm x 20mm
  - 12mm x 20mm
  - 12mm x 21mm
  - 12mm x 29mm
  - 13mm
  - 13mm x 30mm
  - 14.5mm
  - 14mm
  - 14mm x 20mm
  - 14mm x 38mm
  - 15.5mm x 11mm
  - 15mm
  - 15mm
  - 15mm x 20mm
  - 15mm x 21mm
  - 16mm
  - 16mm x 18mm
  - 16mm x 19mm
  - 16mm x 23mm
  - 17mm x 20mm
  - 17mm x 24mm
  - 17mm x 25mm
  - 18mm
  - 18mm x 26mm
  - 18mm x 38mm
  - 19.5mm
  - 19/32" x 25/32"
  - 19mm
  - 20mm
  - 20mm x 30mm
  - 21mm x 22mm
  - 22mm x 45mm
  - 3.5mm x 8mm
  - 3/4" x 1-1/32"
  - 3/4” x 1-9/16”
  - 33mm x 45mm
  - 5/8"
  - 6.5mm x 14mm
  - 6mm x 9mm
  - 7.5mm x 11mm
  - 8mm x 12mm
  - 8mm x 18mm
  - 8mm x 18mm
  - 9.5mm x 20mm
  - 9/16" x 13/16"
  - 9/16" x 23/32"
  - 9/16” x 25/32”
  - 9/32”-1/2"
  - 9mm x 11mm
  - 9mm x 20mm
- Washer Diameter
  - 12.50mm
  - 16mm
  - 17mm
  - 19mm
  - 24mm
  - 25mm
- Width
  - 1-1/8"
  - 10mm
  - 11/32"
  - 11mm
  - 12mm
  - 15/32"
  - 20mm
  - 26mm
  - 5/8"
  - 7/8"
  - 9/16"
Shield Retainers
- Bumper and Fender
- Engine Splash
- Trim
- Weatherstrip

Navigation

Tags:

Screw Honda 19mm M4.8 Sems 90114-SE0-000 S04 1.1

Rocker Molding Clip, Nissan 76882-EG01A (A160)

View full size

Share on Facebook
Remove this product from my favorites
Add this product to my favorites
Print

Rocker Molding Clip, Nissan 76882-EG01A (A160)

CLIP. Rocker Molding.

More details

More info

In Stock and Ships Today!*

Specs:

Black Nylon

Top Head Size: 10mm x 15mm

Bottom Head Size: 18mm

Stem Length: 12mm

Fits into 8mm Hole

Applications:

Nissan 370Z	2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Nissan Altima	2007, 2008, 2009, 2010, 2011, 2012
Nissan Juke	2011, 2012, 2013, 2014, 2015, 2016

Questions? Call Us 800-846-3636

Additional Information:

* Same day shipping applicable to orders placed by 4pm Monday - Friday only. Weekend orders will ship the following Monday.

Parts packaged in a plain bag and labeled with OE part number.

Part will ship same day (Monday thru Friday) if order placed before 4pm est.

LB Auto warrants the parts you receive were properly stored and free of defects, and

are consumable with original form, fit and function.

We are not a dealership, service department, or body shop, please verify your application to the information provided above.

We are wholesale automotive parts distributors and purchase directly from the source.

Call Us Today!

Parts specialists are available
9AM - 5PM, Mon - Fri

Phone:800-846-3636

Email Us

Rocker Molding Clip, Nissan 76882-EG01A (A160)

30 other products in the same category: